Tuesday, October 15, 2019
Wednesday, 20 August 2014 10:13

Water Heater Leaking? Here's What To Do

Written by Maxwell Plumb
Rate this item
(0 votes)

Water Heater Leaking? Here's What To Do.

A leaking water heater can range from a small, barely noticable drip to a full-blown flood. Either way, the damage to your home and property can be expensive; ranging from damage to walls and floors, to unhealthy mold and mildew.

If you see water accumulating near your water heater, it may not actually be coming from the water heater. Nearby appliances and condesation on pipes near the water heater can cause moisture to accumulate nearby. Closely inspect the base of the water heater and valves for signs of leaks.

If you determine the water heater is the cause of the leak, the first step is to turn off power to the water heater. If you have an electric water heater, turn the power off from the cicuit breaker. A gas water heater can be shut of from the power supply attached to the unit, usually be turning a knob to the off position. Next, turn off the water from the cold water shut-off valve located near the top of the water heater.

Water heater leaks can occur in several locations, including: the cold water inlet and hot water outlet, the pressure relif valve, the drain valve, and the bottom of the tank. Fixing a water heater is not a do-it-yourslef project. A qualified plumber should make the repair. Depending on the location and severity of the leak, your plumber will either have to repair the water heater, or recommend replacing it.

Preventing damage from water heater leaks.

For an extra measure of protection from unexpected water heater leaks, specially designed pans can be installed unter the water heater to divert water leaks to a nearby floor drain. There are also special water leak alarms that can turn off the water when a leak is detected from the water heater or another source.

Last modified on Friday, 05 September 2014 10:32
Maxwell Plumb

Maxwell Plumb

E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Experience Maxwell

Maxwell Plumb Blog

  • Maxwell Plumb Does Your Home Need a Dehumidifier? Written by Maxwell Plumb

    During a typical New York summer the air can be hot and muggy outside, which can mean excess moisture inside. Excessive indoor humidity is not just uncomfortable, it can lead to unhealthy mold, musty odors and condensation that can damage wood surfaces and paint.

    In today's tight, well insulated homes, excess moisture can make your air conditioner work harder to keep the air cool and dry. To help keep the air dryer, a dehumidifier can be an effective solution.

    How does a dehumidifier work?
    As warm, humid air is blown across a cold coil by a fan, moisture condenses into liquid, which can be removed through a drain pipe. The dry air then passes over a warm coil and is added back into the room. Dehumidifiers are controlled by an instrument called a dehumidistat, which turns the unit on and off depending on the amount of moisture detected in the air. The level of moisture is controlled by a dehumidistat, which turns the unit on and off. A dehumidifier's capacity is measured in pints of water removed every 24 hours.

    Carrier Whole Home Dehumidifers
    A whole house dehumidifier is designed to work in conjunction with your home's heating and air conditioning system by monitoring and controlling the level of humidity. It operates quietly and is easily maintained by cleaning a filter.

    Have questions about controlling excess humidity in your home? Call Maxwell Plumb, we're here to help.





    Written on Tuesday, 24 March 2015 06:52 in Maxwell Plumb Blog
    Tags: indoor air quality dehumidifier humidity Be the first to comment! Read 4920 times Read more...
MAXWELL PLUMB IS A LEAD-SAFE
EPA Lead Safe NYC
EPA CERTIFIED FIRM
NAT-29738-1

Employment


Go Green

New York City Area Neighborhoods We Serve Include: