Saturday, May 25, 2019
Tuesday, 07 October 2014 13:18

What to Do During a Plumbing Emergency

Written by Maxwell Plumb
Rate this item
(0 votes)
Plumbing emergencies can range from leaking pipes and clogged drains to a faucets that won't shut off and leaking water heaters. It's important that everyone in the household know the location of the shutoff valve for every plumbing fixture and appliance, as well as the home's main shutoff valve.

Water Shutoff Valves

If a specific plumbing fixture or appliance is leaking or malfunctioning, first look for its shutoff valve and turn it clockwise to turn off the water supply just to the affected system.

The shutoff valve is usually located underneath the toilet or sink. Clothes washers will have two shutoff valves, one each for hot and cold water, often located behind the appliance

If the problem is not with a specific fixture or appliance, or you cannot locate the shutoff valve, locate the main shutoff valve to turn off the water to the entire house. The main shutoff valve will be on the inside where the main water supply pipe enters the house. Turn the valve clockwise to shut it off. If the valve is difficult to turn, keep a wrench near the valve for emergencies.

Have a plumbing emergency? Call Maxwell Plumb. Our professional plumbers will be there in minutes to help fix the problem.
Maxwell Plumb

Maxwell Plumb

E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Experience Maxwell

Maxwell Plumb Blog

  • Maxwell Plumb Does Your Home Need a Dehumidifier? Written by Maxwell Plumb

    During a typical New York summer the air can be hot and muggy outside, which can mean excess moisture inside. Excessive indoor humidity is not just uncomfortable, it can lead to unhealthy mold, musty odors and condensation that can damage wood surfaces and paint.

    In today's tight, well insulated homes, excess moisture can make your air conditioner work harder to keep the air cool and dry. To help keep the air dryer, a dehumidifier can be an effective solution.

    How does a dehumidifier work?
    As warm, humid air is blown across a cold coil by a fan, moisture condenses into liquid, which can be removed through a drain pipe. The dry air then passes over a warm coil and is added back into the room. Dehumidifiers are controlled by an instrument called a dehumidistat, which turns the unit on and off depending on the amount of moisture detected in the air. The level of moisture is controlled by a dehumidistat, which turns the unit on and off. A dehumidifier's capacity is measured in pints of water removed every 24 hours.

    Carrier Whole Home Dehumidifers
    A whole house dehumidifier is designed to work in conjunction with your home's heating and air conditioning system by monitoring and controlling the level of humidity. It operates quietly and is easily maintained by cleaning a filter.

    Have questions about controlling excess humidity in your home? Call Maxwell Plumb, we're here to help.





    Written on Tuesday, 24 March 2015 06:52 in Maxwell Plumb Blog
    Tags: indoor air quality dehumidifier humidity Be the first to comment! Read 4481 times Read more...
MAXWELL PLUMB IS A LEAD-SAFE
EPA Lead Safe NYC
EPA CERTIFIED FIRM
NAT-29738-1

Employment


Go Green

New York City Area Neighborhoods We Serve Include: